PM-150Mo Molybdenum Alloyed Powder
PM-150Mo is a molybdenum alloyed powder grade with higher Mo content, stable chemical composition, controlled particle size distribution and reliable physical properties for powder metallurgy and industrial applications.
Product Overview
PM-150Mo is a molybdenum alloyed powder grade developed for powder metallurgy applications requiring higher molybdenum content, stable chemical composition and consistent processing performance.
With approximately 1.49 wt% Mo, controlled particle size distribution, good flowability and reliable green density, PM-150Mo can be reviewed for applications requiring specific alloy composition, stable production consistency and reliable mechanical performance.
PM-150Mo Typical Technical Data
Typical reference values for chemical analysis, physical properties and sieve analysis. Full TDS and COA can be provided upon request.
Chemical Analysis
Main chemical composition and alloying element control.
| Test Name | Unit | Typical Value | Specification |
|---|---|---|---|
| C (Carbon) | wt% | 0.006 | ≤0.01 |
| Si (Silicon) | wt% | 0.030 | ≤0.05 |
| Mn (Manganese) | wt% | 0.100 | ≤0.15 |
| P (Phosphorus) | wt% | 0.007 | ≤0.020 |
| S (Sulfur) | wt% | 0.008 | ≤0.015 |
| HL (Hydrogen Loss) | wt% | 0.090 | ≤0.25 |
| Mo (Molybdenum) | wt% | 1.490 | 1.40–1.60 |
Physical Analysis
Typical apparent density, flowability and green density values.
| Test Name | Unit | Typical Value | Specification |
|---|---|---|---|
| Apparent Density (Hall) | g/cm³ | 2.98 | 2.90–3.15 |
| Flow (Hall) | s/50 g | 26.8 | ≤28 |
| Green Density @ 600 MPa | g/cm³ | 7.10 | ≥7.00 |
Sieve Analysis
Typical particle size distribution based on sieve analysis.
| Particle Size | Unit | Typical Value | Specification |
|---|---|---|---|
| +180 μm | wt% | 0 | ≤1 |
| 150–180 μm | wt% | 2 | ≤10 |
| 106–150 μm | wt% | 23.7 | bal. |
| 75–106 μm | wt% | 26.3 | bal. |
| 45–75 μm | wt% | 27.4 | bal. |
| -45 μm | wt% | 20.6 | 10–30 |
Need PM-150Mo Molybdenum Alloyed Powder?
Send us your application, target specification, current supplier grade or required quantity. Our team will review your requirements and recommend suitable molybdenum alloyed powder options.