PM-100.29A4 Pre-alloyed Powder
PM-100.29A4 is a nickel-molybdenum pre-alloyed powder grade with higher molybdenum content, suitable for applications requiring specific alloy composition and stable processing performance.
Product Overview
PM-100.29A4 is a nickel-molybdenum pre-alloyed powder grade with higher molybdenum content, suitable for applications requiring specific alloy composition and stable processing performance.
PM-100.29A4 Typical Technical Data
Typical reference values for chemical analysis, physical properties and sieve analysis. Full TDS and COA can be provided upon request.
Chemical Analysis
Main chemical composition and impurity control.
| Test Name | Unit | Typical Value | Specification |
|---|---|---|---|
| C (Carbon) | wt% | 0.002 | ≤0.02 |
| Si (Silicon) | wt% | 0.03 | ≤0.05 |
| Mn (Manganese) | wt% | 0.45 | 0.35–0.55 |
| P (Phosphorus) | wt% | 0.012 | ≤0.02 |
| S (Sulfur) | wt% | 0.01 | ≤0.02 |
| HL (Hydrogen Loss) | wt% | 0.13 | ≤0.25 |
| Ni (Nickel) | wt% | 1.48 | 1.30–1.55 |
| Mo (Molybdenum) | wt% | 1.30 | 1.15–1.40 |
Physical Properties
Key powder properties for processing and compaction performance.
| Test Name | Unit | Typical Value | Specification |
|---|---|---|---|
| Apparent Density (Hall) | g/cm³ | 2.98 | 2.90–3.20 |
| Flow (Hall) | s/50 g | 27.1 | ≤28 |
| Green Density @ 600 MPa | g/cm³ | 6.99 | ≥6.65 |
Sieve Analysis
Typical particle size distribution based on sieve analysis.
| Particle Size | Unit | Typical Value | Specification |
|---|---|---|---|
| +180 μm | wt% | 0 | ≤1 |
| 150–180 μm | wt% | Trace | ≤10 |
| 106–150 μm | wt% | 22 | bal. |
| 75–106 μm | wt% | 26 | bal. |
| 45–75 μm | wt% | 29 | bal. |
| -45 μm | wt% | 23 | 15–30 |
Need PM-100.29A4 Pre-alloyed Powder?
Send us your application, target specification, current supplier grade, required alloy composition or quantity. Our team will review your requirements and provide suitable technical support, sample options and quotation.